Top
INDUSTRIAL OVENS

Walk In Ovens

Our company also provide solutions for industrial ovens for drying, ageing, baking, curing, post-curing, annealing, preheating or other heat processing with large or numerous parts up to 450°C. We could design and manufacture the walk-in oven with any choice of airflow patterns (horizontal, vertical and combination airflow) and optional equipment to provide exceptional temperature uniformity inside the oven chamber. 

Walk-in Drum Oven (WIDO-4-DRUMS)
Specification

We are introducing our Walk-in Drum Oven (WIDO-4-Drums)! This oven is designed for drum heating, with 4 Drum x 200 ltr on Drum Pallet, up to 120 °C. 
 

Operating Temperature:

o Range : Ambient up to 100 °C

o Max. Possible : ± 120 °C

Inner dimension (approx.):

W. 1520 mm x D. 1400 mm x H. 1400 mm

Outer dimension (approx.):

W. 2260 mm x D. 1935 mm x H. 2135 mm

Oven Construction

• Stainless Steel SUS 304 Interior, Polished finished

• Mild Steel exterior finished by Jotun Protective paint

• Industrial Rock Wool Insulation

• Air tight double leaf manual swing door

• Manual adjustable air circulation and exhaust dumper

Heating System:

o Forced convection with hot air re-circulating system

o Combination air flow from rear side, return to top side

o Circulation Blower motor : 3 Ø 380 V, 50 Hz, 1,5 Kw

o Heater Power : ± 27 Kw


Total Electrical Installed Power : 3 Ø, 380V, 50 Hz, 28,5 kW
Oven wall mounting type electrical control panel

Microprocessor-based digital indicating temperature controller with features :

o Digital display screen for set point (SV) and actual (PV) temperature

o PID or Fuzzy Control with auto-tuning

o Indication accuracy : ±0.3% ± 1 digit
 

Over temperature protection system controlled by:

-Heater overheat protector

-Hi-limit alarm of chamber temperature control

-Electrical interlock system between circulation blower & heater power switching control

Digital Timing system for soaking/holding process.

Industrial process thermocouple for hot air circulation & heater overheat temperature sensor.
 

Full proportional heater heating control by SCR power regulator, with features:

o PWM system for very good linear control

o High accuracy and fast response

o Able to keep a steady temperature very well

o Extends heater life
 

1 year Sparepart & Services Warranty*

*Terms & Conditions Apply


 

Walk In Drying Oven (WIDO-01-02/1600)
Specification

Our new and improved walk-in drying oven (also known as walk in oven, drying oven, or cabinet oven) is designed for drying process of pump metal parts. This 1600 Ltr oven is equipped to handle temperatures up to 200 °C, and is equipped with proporional forced convection heating system with SCR power regulator (thyristor) to enable durability and excellent heat uniformity. Contact us to learn more!

  • Suitable for drying plating parts
  • Maximum operating temperature up to 200°C
  • Inner dimension : Width 1080 mm x Depth 1000 mm x Height 1500 mm
  • SUS 304 Stainless steel interior
  • Air tight double leaf swing door
  • Manual adjustable air inlet and exhaust dumper
  • Forced convection with :
    • Hot air re-circulating system
    • Horizontal flow, side to side blowing direction
  • Oven wall mounting type electrical control panel
  • Microprocessor based digital indicating temperature controller
  • Overheat protection system
  • Digital timing system for soaking / holding process
  • Industrial process thermocouple
  • On/off heating control (optional: Full proportional heating control)

1-year sparepart & services warranty*
*Terms & Conditions Apply

CALL US NOW
Office (+62) 21 556 62 440
Bpk. Sumber +(62) 811 170 320
Bpk. Harli (+62) 813 885 63 000
Bpk Richard (+62) 812 9795 4547
COME VISIT US
Sentra Prima Tekno Park Blok E No. 12 RT.003 RW.003 Tangerang Banten 15137
SEND US A MESSAGE
Customer Service:
cs@smindo.co.id